How To Make The Service Life Of The Noodle Machine Long Enough

In order to make the service life of the noodle machine long enough, let's have a safety and maintenance problem.

1. Operators should carefully study the instructions before use, in strict accordance with the manual operation.

2. The noodle machine is strictly forbidden to reverse.

3. Check all parts of the system before the abnormal phenomenon, found that the problem should be dealt with in time to avoid causing accidents.

4. Iron or other hard substances into the flour in order to avoid damage to the machine.

5. The second use of flour can not be directly poured into the bucket.

6. When the noodle machine is running, it is strictly forbidden to reach the dangerous parts such as rolls, gears, chains and knives.

7. To ensure that the rotation of the lubrication, there are oil standard, oil cup, gear, chain on the various parts of the oil hole, add oil, cutting knife surface, roll surface, adding a little edible oil.

8. The clutch of the mill and the mixer must be carried out in the shutdown state.

9. The pressure before idling 10-15 minutes, the winter production room temperature maintained 10-15 degrees or more.

10. Keep the noodle machine clean after shutdown, and no residual flour in the rolls.

11. The lubrication of the gears and rolling bearings shall be maintained.

12. Other hard sundries are prohibited from falling into rolls and gears.

13. Replace the bearing grease every six months.

14. It is strictly prohibited to transfer the surface roll clearance to 5 mm or more.